How to Do Oil Change Light Reset

The oil change light is a warning light found in most modern cars. It comes on when the car’s computer determines that it’s time for an oil change. Many people ignore this light, but it’s important to heed it!

An oil change is one of the most important maintenance tasks you can perform on your car. Skipping an oil change can lead to engine problems down the road.

Every car has different maintenance needs, and for some models, it is necessary to reset the oil change light after an oil change is performed. Luckily, this is a relatively simple process that can be done in just a few minutes.

In this blog post, we will explain the oil change light reset process on your vehicle. Stay safe and keep your car running smoothly by following these simple steps!

Oil change light reset step-by-step

1. Find the reset button and Switch the ignition on without starting the engine

To begin, find the reset button in your vehicle. This may be located near or on the dashboard, or somewhere else entirely depending on your vehicle model. Once you’ve located the button, switch the ignition on without starting the engine.

2. Display Mileage and turn off the ignition

Display Mileage and turn off the ignition

It is important to keep track of the miles you drive in your vehicle. This helps you to stay on top of regularly scheduled maintenance, and can also be useful if you ever need to file a warranty claim.

Thankfully, most modern vehicles are equipped with an odometer that makes it easy to track mileage.

Most odometers will display two different types of mileage: total mileage driven, and trip mileage.

Simply go through the various modes until the desired reading appears on the odometer.

Once you have found the right mode, turn off the ignition to save your settings. Now, every time you start your vehicle, the odometer will default to showing total mileage driven.

This ensures that you will always know how many miles are on your car, and can stay on top of its maintenance needs.

3. Hold the Reset Button and Turn the Key

Holding the reset button on your car’s ignition and turning the key back to ON while watching for the oil change light to start blinking.

After letting the light blink on and off for a few seconds, release the reset button and turn the ignition off once again.

4. Start the Car

Start the engine, and allow it to run for a few minutes. Check the oil change light; it should be OFF now.

If the light remains on after you’ve started the engine, it’s possible that you didn’t reset the system correctly. In this case, you’ll need to repeat the reset procedure.

If the light still doesn’t go off after two tries, consult your owner’s manual or the car manufacturer’s website for more information about the process for your specific vehicle.

With these steps, you can quickly and easily perform an oil change light reset for optimal car maintenance.

When do you need to reset the oil change light?

The answer depends on your car and the type of maintenance that is required. In general, most cars require you to reset the oil change light after an oil change has been performed in order to ensure that all of the old oil has been drained and replaced with fresh oil.

Some cars may also require you to reset the light if there are any other types of maintenance or service, such as a tune-up or new filter. To find out if you need to reset your oil change light, consult your owner’s manual or speak with a mechanic for more information specific to your vehicle.

FAQs about oil change light reset

Why does my oil change light on when I just changed my oil?

The light could come on after an oil change because of a problem with the pump.

If this is happening, it means that not enough air is getting into your car’s engine. This can lead to parts wearing out over time because they don’t move as much as they should.

A regular schedule at least once per month will help prevent these issues from occurring.

Alternatively, the light could be on because of a sensor problem. If this is the case, you may need to have your car repaired by a mechanic or replaced by the manufacturer if it’s no longer under warranty.

However, before taking either of these steps, try resetting your oil change light as described above and see if that fixes the problem.

Sometimes all it takes is a quick oil change light reset!

Should I drive with the oil light on?

The oil warning light is a very serious situation and should not be ignored. Oil pressure or the level being too low can cause an auto engine to lose power, which means that it’s unsafe for you to drive along with this issue unresolved!

If your car has been alerted by its own indicator lights go straight into the emergency parking lot immediately so as soon as a possible stop preventing any further damage from occurring.

Depending on the severity of the problem, you may need to have your car towed or take it in for maintenance right away. In some cases, it’s possible to reset the light and continue driving as long as its underlying cause is resolved quickly.

However, your best bet is always to err on the side of caution and get your car checked out by a mechanic if you notice that its oil change light is on.

Why is my oil light on but my oil is full?

Low oil pressure is typically an indication that there’s something wrong with your engine.

It can be caused by being low on fluid, dirty or leaky oils, and even due to some accidents where cars have been hit from behind causing them to stop suddenly which causes their lights to come on as well.

Is it okay to drive with my oil light blinking?

When the oil light comes on, it means there may be a problem with either your sensor or pressure.

If you have less than 5 PSI in certain areas when not moving then this will trigger an engine stop-start sequence that causes flickering behaviors from both lights at once! If the problem keeps persisting, here is what to do if the oil light comes on and off but oil is full.

How long you should change the oil after the light comes on?

When your car’s oil change light is on, you should schedule the maintenance within one or two weeks of driving if you only drive on the highway.

However, if your car has been used for stop-and-go driving or short trips that don’t allow the engine to reach its ideal temperature, you may want to get it changed as soon as possible.

The best course of action is to consult your owner’s manual or schedule an appointment with a trusted mechanic to determine when you should change your oil based on the unique needs of your vehicle and how you use it.

How low is your oil when the light comes on?

About 2 quart low. Most cars will start to lose oil pressure when it falls below the minimum range, which is usually around 5-10 PSI.

What does reset oil life mean?

If you have an oil change, the mechanic will need to reset your engine’s system. This is because it monitors when and how often we should replace fluids in our cars!

Can you drive a car with 15 oil life?

The yellow wrench doesn’t always mean that your car is unsafe to drive, but you should take it in for regular care when the oil life percentage reaches 15%.

Is the oil life indicator accurate?

Yes. The oil life monitoring system in your car is designed to give you an accurate estimate of when you need to change your oil.

However, it’s important to keep in mind that the system is calibrated for around-town driving. If you do a lot of highway driving, you may find that the warning light comes on much later than it does for around-town driving.

This is because the system takes into account factors such as engine temperature and rpm, both of which are higher during highway driving.

As a result, you can trust the oil life monitoring system to give you an accurate estimate of when you need to change your oil, regardless of how you’re using your vehicle.


It’s important to be proactive about your car maintenance, and that includes keeping an eye on the oil change light. By knowing when it’s time for an oil change, you can avoid more costly repairs in the future.

While the oil change light reset process may seem daunting at first, it’s actually a very simple and straightforward procedure. All you need is a few minutes and some basic knowledge about your car. With a little practice, you’ll be able to do it in no time! Have you tried resetting your oil change light? If so, tell us how it went in the comments below.

Photo of author

James Todd

I'm James, I've been a car mechanic for as long as i can remember, It's always been my dream to work on cars and i love it more than anything. I love the challenge of figuring out what's wrong with them. I'm good at my work and people often come to me for advice. I'm happy to help out whenever i can and i always try to learn something new. I enjoy nothing more than helping people keep their vehicles running smoothly - It's what makes me happy.

Leave a Comment